Geotechnical Atterberg Limits 3 Point Report

Report Name: Geotechnical Atterberg Limits 3 Point (example)

File Name: EarthSoft.Reports.Library.176839.dll

Dependencies: Licensed EQuIS Geotech and Geotech Schema

Software: EQuIS Professional and Enterprise

Source: EQuIS Geotech (EarthSoft Community Center > Products > EQuIS Geotech)

Language: English

Output Type: Excel1 or PDF

Description: The Geotechnical Atterberg Limits 3 Point report plots the Water Content and the Blow Counts data for each Atterberg Limits readings result and applies a line of best fit. This report filters the results based on the selected task and will only display samples that have an associated DT_GEO_TEST table record where DT_GEO_TEST.TEST_TYPE = ‘Atterberg_Readings’. This report can be run in EQuIS Professional or published to EQuIS Enterprise.

Installation Instructions: This report requires an EQuIS Geotech license and the Geotech Schema applied to the database. The Geotechnical Atterberg Limits 3 Point report (EarthSoft.Reports.Library.176839.dll) is available for download in the Products\EQuIS Geotech folder on the Downloads Dashboard on the EarthSoft Community Center. For Enterprise use, this report should be published to the database. When publishing the report, the assembly should be stored in the database. The report will be available for selection once it has been published.

Additional Details:

The blow count information is gathered from the DT_GEO_RESULT table where DT_GEO_RESULT.GEO_RESULT_CODE = 'number_of_blows' and the water content information comes from the DT_GEO_RESULT table where DT_GEO_RESULT.GEO_RESULT_CODE = 'att_water_content'. This report only plots the reading results of an Atterberg test that has at least three blow count reading values.

When running the report, DT_SAMPLE.TASK_CODE must be populated to generate an output.

This report supports task_code based paging.

This report uses the Shared Attributes detailed in the Shared Report Attributes article.

Note: The EarthSoft_AtterbergLimits_3Point.xlsx template file is provided with EQuIS Geotech. See the Geotechnical Template Configuration article for detailed information on editing/creating Excel templates for use with EQuIS Geotech reports.

Tables: DT_GEO_RESULT, DT_GEO_TEST, DT_LOCATION, DT_SAMPLE, DT_TASK

Report Parameters

Location
Individual(s)	Parameter for selecting individual locations.
Group(s)	Parameter for selecting location groups.
Task(s)	Parameter for selecting task code(s).
Excel Template	Parameter for selecting Excel template. The report searches the DT_FILE table where DT_FILE.PLACE_TYPE = ‘Atterberg_3Point’.
Override Template (EQuIS Professional Only)	Parameter to enter the full file path to use a local override template. This parameter is only available in EQuIS Professional.
Reportable	Parameter for selecting one or more options for reportable result(s). The list of parameter options is based on the values in DT_GEO_RESULT.REPORTABLE_RESULT.
Output File Type	Parameter for selecting the output file type. The options are PDF or Excel.

1Excel report output requires a valid license of Microsoft Excel to view the output.