Geotechnical Grain Size Analysis Report

Report Name: Geotechnical Grain Size Analysis (example ASTM) (example AASHTO)

File Name: EarthSoft.Reports.Library.176839.dll

Dependencies: Licensed EQuIS Geotech and Geotech Schema

Software: EQuIS Professional and Enterprise

Source: EQuIS Geotech (EarthSoft Community Center > Products > EQuIS Geotech)

Language: English

Output Type: Excel1 or PDF

Description: The Geotechnical Grain Size Analysis report combines the sieve and hydrometer analysis results and plots a Grain Size Distribution. This report filters the results based on the selected task and will only display samples that have an associated DT_GEO_TEST table record where DT_GEO_TEST.TEST_TYPE = ‘Sieve’, ‘Sieve_Readings’, ‘Hydrometer’, and ‘Hydrometer_Readings’ with the DT_GEO_TEST.TEST_METHOD = ‘ASTM D422’, ‘ASTM C136’, , ‘AASHTO T-88’ or null. This report can be run in EQuIS Professional or published to EQuIS Enterprise.

Installation Instructions: This report requires an EQuIS Geotech license and the Geotech Schema applied to the database. The Geotechnical Grain Size Analysis report (EarthSoft.Reports.Library.176839.dll) is available for download in the Products\EQuIS Geotech folder on the Downloads Dashboard on the EarthSoft Community Center. For Enterprise use, this report should be published to the database. When publishing the report, the assembly should be stored in the database. The report will be available for selection once it has been published.

Additional Details:

For the sieve analysis results, this report plots the percent finer value against the sieve diameter size. For the hydrometer analysis, the report plots the percent finer and the associated particle diameter value. Based on the data available, the report calculates the D60, D30, and D10 Coefficient of curvature (Cc) and the Uniformity Coefficient (Cu) values per sample. Each curve on the plot corresponds to one sample.

When running the report, DT_SAMPLE.TASK_CODE must be populated to generate an output.

This report supports task_code based paging.

Template:

The Geotechnical Grain Size Analysis report is designed to use a selected Microsoft Excel template.

Note: The EarthSoft_GrainSizeAnalysis_ASTMD422.xlsx and EarthSoft_GrainSizeAnalysis_AASHTOT88.xlsx template files are provided with EQuIS Geotech. See the Geotechnical Template Configuration article for detailed information on editing/creating Excel templates for use with EQuIS Geotech reports.

In addition to the Shared Attributes detailed in the Shared Report Attributes article, the following Excel Name Manager fields are specific to the Geotechnical Grain Size Analysis report.

Excel Name Manager Field	EQuIS Source	Description
sieve	DT_GEO_RESULT.GEO_RESULT_CODE = ‘Sieve_Diameter’ where DT_GEO_TEST.TEST_TYPE = 'Sieve_Readings'	Sieve diameter size
percent_finer	DT_GEO_RESULT.GEO_RESULT_CODE = ‘Sieve_Percent_Finer’ where DT_GEO_TEST.TEST_TYPE = 'Sieve_Readings'	Percent finer value associated with the sieve diameter size
dhundred	Calculated	Particle diameter at 100 percent
dsixty	Calculated	Particle diameter at 60 percent passing
dthirty	Calculated	Particle diameter at 30 percent passing
dten	Calculated	Particle diameter at 10 percent passing
cc	Calculated	Coefficient of curvature. This value cannot be calculated if D60, D30, and D10 cannot be determined.
cu	Calculated	Coefficient of uniformity. This value cannot be calculated if D60 and D10 cannot be determined.

Tables: DT_GEO_RESULT, DT_GEO_TEST, DT_LOCATION, DT_SAMPLE, DT_TASK

Report Parameters

Location
Individual(s)	Parameter for selecting individual locations.
Group(s)	Parameter for selecting location groups.
Sample(s)	Parameter for selecting sample(s).
Task(s)	Parameter for selecting task code(s).
Excel Template	Parameter for selecting Excel template. The report searches the DT_FILE table where DT_FILE.PLACE_TYPE = ‘Grain Size’.
Override Template (EQuIS Professional Only)	Parameter to enter the full file path to use a local override template. This parameter is only available in EQuIS Professional.
Reportable	Parameter for selecting one or more options for reportable result(s). The list of parameter options is based on the values in DT_GEO_RESULT.REPORTABLE_RESULT.
Output File Type	Parameter for selecting the output file type. The options are PDF or Excel.

1Excel report output requires a valid license of Microsoft Excel to view the output.