Geotechnical Gradation (Hydrometer) - ASTM D7928 Report

<< Click to Display Table of Contents >>

Navigation:  EQuIS Library > Reports > EarthSoft Standard Reports by Product > Standard with Geotech > Geotech Sample Reports >

Geotechnical Gradation (Hydrometer) - ASTM D7928 Report

Report Name: Geotechnical Gradation (Hydrometer) - ASTM D7928 (example)

File Name: EarthSoft.Reports.Library.176839.dll

Dependencies: Licensed EQuIS Geotech and Geotechnical Schema

Software: EQuIS Professional and Enterprise

Source: EQuIS Geotech (EarthSoft Community Center > Products > EQuIS Geotech)

Language: English

Output Type: Excel1 or PDF


Description: The Geotechnical Gradation (Hydrometer) - ASTM D7928 report creates a Grain Size Distribution by plotting the hydrometer analysis results that are in accordance with ASTM D7928. This report filters the results based on the selected task and will only display samples that have an associated DT_GEO_TEST record where DT_GEO_TEST.TEST_TYPE = ‘Hydrometer’ and ‘Hydrometer_Readings’ and the associated DT_GEO_TEST.TEST_METHOD = ‘ASTM D7928’.This report can be run in EQuIS Professional or published to EQuIS Enterprise.


Installation Instructions: This report requires an EQuIS Geotech license and the Geotechnical Schema applied to the database. The Geotechnical Gradation (Hydrometer) - ASTM D7928 report (EarthSoft.Reports.Library.176839.dll) is available for download in the Products\EQuIS Geotech folder on the Downloads Dashboard on the EarthSoft Community Center. For Enterprise use, this report should be published to the database. When publishing the report, the assembly should be stored in the database. The report will be available for selection once it has been published.


Additional Details:


For the hydrometer analysis results, this report plots the percent finer value against the particle diameter size.  Each curve on the plot corresponds to one sample.


This report supports task_code based paging.  


Note: The EarthSoft_Hydrometer_ASTMD7928.xlsx template file is provided with EQuIS Geotech. See the Geotechnical Template Configuration article for detailed information on editing/creating Excel templates for use with EQuIS Geotech reports.





Report Parameters



Parameter for selecting individual locations.


Parameter for selecting location groups.


Parameter for selecting task code(s).

Excel Template

Parameter for selecting Excel template. The report searches the DT_FILE table where DT_FILE.PLACE_TYPE = ‘ASTMD7928’.

Override Template
(EQuIS Professional Only)

Parameter to enter the full file path to use a local override template. This parameter is only available in EQuIS Professional.

Output File Type

Parameter for selecting the output file type. The options are PDF or Excel.


1Excel report output requires a valid license of Microsoft Excel to view the output.