Well Redevelopment Form

<< Click to Display Table of Contents >>

EQuIS 7  >>  EDGE > Forms >

Well Redevelopment Form

The Well Redevelopment Form facilitates data entry into the Well_Redevelopment format section in the EDGE format. The form data are mapped to the DT_WELL_DEVELOPMENT table in EQuIS.  

 

Pre-redevelopment and redevelopment data can be exported to an EDGE EDD using parameters in the EDGE Field EDD report.

 

Setup

 

To enable the correct export of well redevelopment data in the EDGE Field EDD report, there must be a list of RT_LOOKUP records that defines a parameter order that matches with what is shown on the various sections of the form. The values to enter, in an example ordering, are in the following table:

 

lookup_type

lookup_code

lookup_desc

EDGE_Well_Redevelop

1

 StartTime

EDGE_Well_Redevelop

2

 StopTime

EDGE_Well_Redevelop

3

TotalTime

EDGE_Well_Redevelop

4

 IntervVol

EDGE_Well_Redevelop

5

 TotalVol

EDGE_Well_Redevelop

6

 TotalVolDev

EDGE_Well_Redevelop

7

 FlowRate

EDGE_Well_Redevelop

8

FlowRateDev

EDGE_Well_Redevelop

9

 Temp

EDGE_Well_Redevelop

10

 SpecCond

EDGE_Well_Redevelop

11

 pH

EDGE_Well_Redevelop

12

Turb

EDGE_Well_Redevelop

13

 BrushScr

EDGE_Well_Redevelop

14

  SurgeWell

EDGE_Well_Redevelop

15

 param_1

EDGE_Well_Redevelop

16

  param_2

EDGE_Well_Redevelop

17

  param_3

EDGE_Well_Redevelop

18

  param_4

EDGE_Well_Redevelop

19

  param_5

EDGE_Well_Redevelop

20

  notes

 

Set up a remap for the EDGE Well Revelopment Form to ensure that the values recorded in EDGE map to the correct well development parameter codes used in your EQuIS database. In the reference table; RT_REMAP_DETAIL, EXTERNAL_FIELD, and EXTERNAL_VALUE data originate from EDGE, while INTERNAL_VALUE contains data as described/recorded in EQuIS.

 

RT_REMAP: remap_code = edge_well_redevelop

 

RT_REMAP_DETAIL:

For all rows: remap_code = edge_well_redevelop

There are two sets of remaps that can be set up: parameter name and unit

Parameter name

oexternal_field = "dev_parameter"

oexternal_value = include a row for each of the following:

 

StartTime

StopTime

TotalTime

IntervVol

TotalVol

TotalVolDev

FlowRate

FlowRateDev

Temp

SpecCond

pH

Turb

BrushScr

SurgeWell

param_1

param_2

param_3

param_4

param_5

notes

 

ointernal_value = [dev_parameter value that should be stored in DT_WELL_DEVELOPMENT.DEV_PARAMETER; cannot exceed 11 characters]

 

Unit

external field = "dev_param_unit"

external_value = [unit to be stored in DT_WELL_DEVELOPMENT.DEV_PARAM_UNIT; cannot exceed 15 characters]

internal_value = [parameter name as seen in the above list of "dev_parameter" external_values, i.e. the parameter name used by EDGE]

 

The Well Redevelopment Form consists of the following four sections.

 

1.General Information

2.Pre-Redevelopment Data

3.Redevelopment Data

4.Post-Redevelopment Data

 

The content of each section is described below.

 

General Information

 

25244-WellRedevelopmentFormGeneral Info

 

General Information consists of the items listed below.

 

Well ID        

Well Diameter (inches)        

Well Depth (feet)        

Screen Interval (feet)        

Well Type        

Formation Type

 

For the next Sections (Pre-Redevelopment Data, Redevelopment Data, Post-Redevelopment Data), note that the sequence of the data fields can be adjusted within the form by drag and drop.

 

Pre-Redevelopment Data

 

25244-WellRedevelopmentFormWellPreRedevelopment

 

Pre-Redevelopment Data consists of the items listed below.

 

Well ID        

Date        

Start Time (24 hour)        

Reading Time   (24 hour)        

Elapsed Time (min): Reading Time minus Start Time (auto-calculated)

Total Volume (mL)        

Flow-Rate (mL/min): Total Volume divided by Elapsed Time (auto-calculated)

Temperature (°C)        

Specific Conductance (µmhos/cm)        

pH (s. u.)        

Turbidity (NTU)

 

Redevelopment Data

 

25244-WellRedevelopmentForm

 

Redevelopment Data consists of the items listed below.

Well ID        

Date        

Start Time (24-hour)        

Stop Time (24-hour)        

Total Time (min): Stop Time minus Start Time (auto-calculated)

Interval Volume (gal)        

Total Volume (gal): Summed from all previous Interval Volume values (auto-calculated)

Flow rate (gal/min): Interval Volume divided Total Time (auto-calculated)

Brush Screen        

Surge Well        

Turbidity (NTU)

 

Post-Redevelopment Data

 

25244-WellPostRedevelopment

 

Post-Redevelopment Data consists of the items listed below.

 

Well ID        

Date        

Start Time (24 hour)        

Reading Time   (24 hour)        

Elapsed Time (min): Reading Time minus Start Time (auto-calculated)

Total Volume (mL)        

Flow-Rate (mL/min): Total Volume divided by Elapsed Time (auto-calculated)

Temperature (°C)        

Specific Conductance (µmhos/cm)        

pH (s. u.)        

Turbidity (NTU)

 

Populate the data in each section and field. The EDD can then be saved and exported to an EQuIS database. For information on this process, see Export to EDP.

 

Once submitted to the database, the data may be viewed in DT_WELL_DEVELOPMENT.