Follow the steps below to add Action Levels to XY Charts.
1.In EQuIS Professional, click Reports in the Open group of the EQuIS Home Toolbar.
2.Select the Analytical Results II Report and click Open.
3.Click and select the following:
Parameters |
Selection |
|---|---|
Sample Date Range End |
03/28/2017 |
Sample Matrix(es) |
WG |
Result Analyte Individual(s) |
Tricholoroethylene |
Result Units |
ug/l |
4.Type TCE WG ug/l in the blank User Reports field to save the query parameters; click Save.
5.Click Go to run the report. The results will be returned in grid format.
6.Click Reports in the Open group of the EQuIS Home Toolbar.
7.Select the Action Level Exceedance Report II by User Report and click Open.
8.Click and select the following:
Parameters |
Selection |
|---|---|
User Report |
TCE WG ug/l, Analytical Results II |
Action Level(s) |
CLEANWATER INDUST |
Exceedance Flag |
xxx |
9.Click Go to run the report.
10.Click XY Chart .png){kind=small}
on the Action Level Exceedance menu.
11.In the Data pane, select the following:
Parameters |
Selection |
|---|---|
Dataset |
Action Level Exceedance II by User Report |
X-Axis |
SAMPLE_DATE |
Y-Axis |
REPORT_RESULT_VALUE |
Group Series By |
CHEMICAL_NAME |
Group Charts By |
SYS_LOC_CODE |
12.Click Add Series in the Data pane to display the trend plot.
Note: Setting the parameter Group Charts = SYS_LOC_CODE sorts the results by putting multiple tabs at the bottom of the Trend Plot. Select each tab to view the Analytical Results XY Chart for that chemical. |
13.Select B-75.
14.In the Data pane, select the following:
Parameters |
Selection |
|---|---|
Dataset |
Action Level Exceedance II by User |
X-Axis |
SAMPLE_DATE |
Y-Axis |
ACTION_LEVEL |
Group Series By |
ACTION_LEVEL_CODE |
Group Charts By |
SYS_LOC_CODE |
15.Click Add Series in the Data pane to display the trend plot. The analytical results and action levels are present.
Note: The first chart is active whenever a new series is added to all the charts. |