Built-in Checks and Calculations

<< Click to Display Table of Contents >>

EQuIS 7  >>  EDGE > Forms > Field Sample Form >

Built-in Checks and Calculations

The following are built-in format checks in the Field Sample Form:

 

1.Parent_sample_code is required where RT_SAMPLE_TYPE.NEED_PARENT_SAMPLE for a sample_type_code = "Y"

2.Copy Sampler from previous records

3.Copy Weather Conditions: If blank then copy from the latest sample on the same day

4.Sys_loc_code is required where sample_type_code=N. (N is the default value defined in the enumeration NormaSampleTypeCode. It can be changed to match your normal sample type.)

5.UpdateSampleEquipment

6.Sys_loc_code is required where sample_type_code=N  (N is the default value defined in the enumeration NormaSampleTypeCode. It can be changed to match your normal sample type.)

7.Populate project fields from task_v1 section

8.CheckDepthValues: If FieldSampleStartEndDepthCheck is set to Y then check if start_depth is < then end_depth

9.If depth values are entered depth_unit is required

10.CompositeCheck: if composite_check enum set to true then do sample_start_date and sample_end_date are required.

11.FilteredCheck: If filtered_screened = filtered or Screened then different size will apply.

12.Field Results: Result_value is required unless detect_flag='N', qualifier = < or qualifier = >

13.Field Results: Check for EDGE_TEXT in RT_MTH_ANL_GROUP.REMARK to allow text values

14.Field Results: Alkalinity Calculation

15.Field Results: Flow Calculation

16.Field Results: Advanced action level checks and purge stabilization or standard action level and purge stabilization

17.Measurement Equipment: Update Opcheck date value

18.Measurement Equipment: Update data logger status based on DT_EQUIPMENT.OPERATION_STATUS

19.WaterLevel_Purge: Populate inner_diameter from historical sheet

20.WaterLevel_Purge: populate depth of well

21.WaterLevel_Purge: populate ref elevation

22.WaterLevel_Purge: retrieve lnapl cas_rn

23.WaterLevel_Purge: historical water level check

24.WaterLevel_Purge: historical lnapl check

25.WaterLevel_Purge: waterlevel screen depth check

26.WaterLevel_Purge: Populate water_level_elev by subtracting water_level_depth from historical_reference_elev

27.WaterLevel_Purge: Calculate well volume